Year End / Black Friday Sale - Save 12% Off Everything w/ Code: YES24

24% Off Returns (both Steelcase & Haworth) w/ Code: RETURN24

How to Install or Replace the Sliding Lumbar Pad in your Steelcase V1 or V2 Leap Chair

How to Install or Replace the Sliding Lumbar Pad in your Steelcase V1 or V2 Leap Chair

David Crandall |

Steelcase Leap V1 & V2 Lumbar Installation or Replacement Video:

https://www.youtube.com/watch?v=PD5n0omw1so

The Lumbar is an important ergonomic feature that can greatly improve the experience of sitting in your Leap chair. Whether you need to readjust, remove, or reinstall your lumbar, this guide will take you how to do so in an easy-to-follow way.

Removing the Lumbar

  1. Locate the lumbar adjustment tabs on the sides of the chair and move them both to the highest position.
  2. Using your hands, slid one of the tabs up over the plastic lumbar stop on the back frame.
  3. Repeat this process with the opposite tab to completely release the lumbar.
  4. Slide the lumbar out from the seat back.

Reinstalling the Lumbar

  1. Slide the lumbar between the frame and pad on the back of the chair.
  2. Align one of the lumbar tabs on the back frame below the lumbar stop. To install this tab, snap it onto the frame with pressure or a good smack.
  3. Repeat this process with the other lumbar tab on the opposite side of the chair.
  4. Try adjusting your lumbar, it should slide up and down and be stopped by the lumbar stops. If this is not the case, then check the tabs to make sure they are fully installed on the frame.

Conclusion:

The Lumbar on the Leap chair is relatively easy to remove and install, and we hope you found this article and video helpful in achieving that task. If you have any questions at all, don't hesitate to reach out to us via our contact page, chat, or on our Facebook page.

Shop Office Chairs Mentioned in this Article:

Crandall Office Furniture has been remanufacturing Steelcase & Herman Miller office chairs since 2002, and since then has grown to become the largest remanufacturer of high-end office seating in the United States. We see and work on thousands of these chairs every year, which gives us a unique insight into how they stand up to long term use, where they fail, and how to fix them. If you're looking to learn more about high end seating, you're in the right place!

Learn More About our Remanufactured & Refurbished Chairs and our process here:
https://www.crandalloffice.com/remanufactured-chairs/